If you already have the latest version, download the program from the manufacturer's website, and then run the installation. Method 1: Copy the installation files to your computerCopy the installation files to a local hard disk on your computer or to other removable media. Note the location, and then run the installation from that location.
If you're not sure, check the Readme file in the folder for instructions about how to run the installation. If you are installing a program from the Internet, redownload the file select Save instead of Run in the download dialog box , save the file to a folder on a local hard disk on your computer or to other removable media.
Then, run the installation from that location. If your installation files are on a network for example, a commercial or corporate environment , copy all the files to a folder on a local hard disk on your computer, and then run the installation from that location. Method 2: Obtain a fresh version of the installation packageIf some time has elapsed between when you downloaded the package and when you tried to install it, do the following:.
If you already have the latest version, download the program again, and then run the installation. Programs that are currently running on your computer are interfering with the installation process. Disable programs that might be interfering with the installation process. To do this, follow these steps:. Click Start , type msconfig in the Search box, and then click msconfig. If you are prompted for an administrator password or confirmation, type the password, or provide confirmation.
On the General tab, click Selective startup , and then clear the Load startup items check box. Click Services , click Hide all Microsoft services , and then click Disable all. When you are finished troubleshooting the problem, restart the computer in Normal Startup mode. For more information about how to use MSConfig, see How to troubleshoot a problem by performing a clean boot in Windows 8, Windows 7, or Windows Vista. There are typically several ways to remove any program.
In this situation, try some other method to remove the program. Click Start , and then click All Programs. Select the program, and then click Uninstall. Follow the instructions. Make sure that you don't have any file or folder names that are longer than characters.
For more about the maximum path length limitation, see Naming files, paths, and namespaces. Most programs create an installation log. If you can't locate such a log, you can enable verbose MSI logging.
For more information, see How to enable Windows Installer logging. Note If you're running the. For example, you can run the following command:. A failed installation typically logs "Return Value 3" where the problem occurred and where the installation rollback began. The description of the failure appears immediately before the Return Value 3 log entry. You can use the Wilogutl. This tool may suggest solutions to errors that are found in a log file. It is available in the latest Windows Software Development Kit.
The following is an example of how to use the Wilogutl. You may be able to manually uninstall some parts of the program through the Windows interface. For example, you may be able to delete program files and folders.
However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it.
Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:. If Method 1 does not resolve the problem, use Method 2. Method 1Verify that you are logged on as a user who belongs to the local Administrators group. To do this, click Start , click Run , type nusrmgr. If you are part of a network domain, follow these steps:.
In the User Accounts window, click to select your account from the list, and then click Properties. On the Group Membership tab, verify that you are in the Administrators group. If you are not part of a network domain, in the User Accounts window, click your account, and then verify that Computer Administrator appears under your account name.
After you logged on as an administrator, try to visit the Windows Update Web site or the Microsoft Update Web site again. If the problem is resolved, do not continue troubleshooting. Method 3Verify the permissions on the registry keys that are used by the Windows Update client and the Microsoft Update client. I want to advise against rolling back snapshots, especially on DC's, so as not to provoke USN rollbacks.
Workaround: prevent one of the two DC's from booting, then uninstall today's hotfixes first on one and then on the other DC.
In the comments of my blog post above and its German counterpart , other blog readers confirm this problem. The workaround is, to uninstall the January 11, security update. Tip: To avoid that the DC restarts too quickly during uninstall, just deactivate the network connection pull the plug or deactivate the network driver. German blog reader MOM20xx had the boot loop even after uninstalling the update and notes that the security-only update KB should also be uninstalled on the domain controllers.
He then posted the following dump excerpt. The process wininit. The system will now shut down and restart. Faulting application name: lsass.
So there wininit. I also have another feedback on Facebook that update KB on Windows Server is causing the restart of the AD controllers the AD controller is restarted every 15 minutes. Boot-Loop on Windows Server On reddit. See also the links below. The error message is that the hypervisor is not running: Hypervisor launch failed; The operating systems boot loader failed with error 0xCBB. This is probably update KB for Server R2 — just as a hint, if there should be problems under Windows Server — Many thanks for this.
We were hours trying to resolve this as our HyperV virtual servers wouldn't start. Eventually came across your site, uninstalled update, rebooted and it now works fine. I wouldn't have worked this out to be honest if it wasn't for your site. Echoing this comment — same behavior, same fix. Thank you very much for this thread! Rollback worked and I avoided a coronary episode.
Thank you. Not sure if it's the solution, but I added the registry key below and the server hasn't rebooted for 40 minutes now. FYI — That key was introduced with a November patch for kerberos security. A later patch will enforce it and key won't do anything. But that was planned for the summer, hopefully MSFT has an actual fix by then. I have 2 DC with r2, the updates did fail during install, so there is nothing to remove.. But still got loops. Need te restore them from backups.. The password provided is too short to meet the policy of your user account.
Choose a longer password. The policy of your user account does not allow you to change passwords too frequently. This is done to prevent users from changing back to a familiar, but potentially discovered, password. If you feel your password has been compromised, contact your administrator immediately to have a new one assigned. You have attempted to change your password to one that you have used in the past.
The policy of your user account does not allow this. Select a password that you have not previously used. This system will shut down in 1 hour. To restore access to this installation of Windows, upgrade this installation using a licensed distribution of this product. The application will not run properly. Updating this driver might allow the system to go to standby mode.
Windows is increasing the size of your virtual memory paging file. During this process, memory requests for some applications might be denied.
For more information, see Help. The file has been replaced with the signed file. An attempt to remove a process DebugPort was made, but a port was not already associated with the process.
This version of Windows is not compatible with the behavior version of directory forest, domain, or domain controller. The device encountered an error while applying power or reading the device configuration. This might be caused by a failure of your hardware or by a poor connection. The create operation failed because the name contained at least one mount point that resolves to a volume to which the specified device object is not attached.
The device object parameter is either not a valid device object or is not attached to the volume specified by the file name. Hibernation will be disabled until the system is restarted. This device will not be used. Contact your system vendor for system BIOS update. This warning level status indicates that the transaction state already exists for the registry subtree, but that a transaction commit was previously aborted.
The commit has NOT been completed, but it has not been rolled back either so it can still be committed if desired. A substitute prefix was used, which will not compromise system security. However, this might provide more restrictive access than intended. Some data might have been lost. This might be insecure. This is secure, but might be incompatible with previous releases of the operating system. The thread was resumed and termination proceeded. Local fixes must be performed on this image. This informational level status indicates that a specified registry subtree transaction state did not yet exist and had to be created.
An exception is raised so a debugger can load, unload, or track symbols and breakpoints within these bit segments. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but it was unable to reassign the failing area of the device. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but it was not able to reassign the failing area of the device.
The remaining data will be sent later. The CPUs in this multiprocessor system are not all the same revision level. To use all processors the operating system restricts itself to the features of the least capable processor in the system. If problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported. The system has automatically enabled a tracking code to try and catch the culprit. A reparse should be performed by the object manager because the name of the file resulted in a symbolic link.
This success level status indicates that the transaction state already exists for the registry subtree, but that a transaction commit was previously aborted. The commit has now been completed. This indicates that a notify change request has been completed due to closing the handle which made the notify change request. The computer was able to connect on a secondary transport. The translator has translated these resources into the global space and no further translations should be performed.
The data provider requires that previously fetched data is released before asking for more data. The client of a component requested an operation that is not valid given the state of the component instance.
The Desktop heap encountered an error while allocating session memory. There is more information in the system event log. This error can be caused by network connectivity issues. This error was returned by the server on which the file exists. This error can be caused if the device has been removed or the media is write-protected.
The volume does not contain a recognized file system. Be sure that all required file system drivers are loaded and that the volume is not corrupted. One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful. The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.
The registry could not read in, write out, or flush one of the files that contain the system's image of the registry. The system attempted to load or restore a file into the registry, but the specified file is not in a registry file format. A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes. The account name is invalid or does not exist, or the password is invalid for the account name specified.
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. The account specified for this service is different from the account specified for other services running in the same process. This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service's process terminates unexpectedly.
The executable program that this service is configured to run in does not implement the service. Unable to open a device that was sharing an IRQ with other devices. At least one other device that uses that IRQ was already opened. The current process has used all of its system allowance of handles for Windows manager objects. Unable to move the replacement file to the file to be replaced.
The file to be replaced has retained its original name. The file to be replaced has been renamed using the backup name. The system shutdown cannot be initiated because there are other users logged on to the computer. The network path was either typed incorrectly, does not exist, or the network provider is not currently available.
Try retyping the path or contact your network administrator. Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again. An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
The network location cannot be reached. For information about network troubleshooting, see Windows Help. A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached. The operation being requested was not performed because the user has not logged on to the network.
The specified service does not exist. An attempt was made to perform an initialization operation when initialization has already been completed. This operation is not supported on a computer running Windows Server operating system for Small Business Server. The remote system is not available.
This program is blocked by Group Policy. For more information, contact your system administrator. A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific.
The Kerberos protocol encountered an error while validating the KDC certificate during smartcard logon. The Kerberos protocol encountered an error while attempting to utilize the smartcard subsystem. The system detected a possible attempt to compromise security. Ensure that you can contact the server that authenticated you.
The Group Policy framework should call the extension in the synchronous foreground policy refresh. Windows cannot open this program because the license enforcement system has been tampered with or become corrupted. The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
An attempt to perform an operation on a debug object failed because the object is in the process of being deleted. You do not have permissions to execute bit applications. Check your permissions with your system administrator.
The service start failed because one or more services in the same process have an incompatible service SID type setting. A service with a restricted service SID type can only coexist in the same process with other services with a restricted SID type.
The service notification client is lagging too far behind the current state of services in the machine. A privilege that the service requires to function properly does not exist in the service account configuration.
The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a null string. An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client. Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member. Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.
The value provided for the new password does not meet the length, complexity, or history requirements of the domain. Logon failure: User account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced. The specified attributes are invalid, or incompatible with the attributes for the group as a whole. Either a required impersonation level was not provided, or the provided impersonation level is invalid.
Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied. Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk. Generic access types were contained in an access mask that should already be mapped to nongeneric types.
The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process. The user cannot be removed from a group because the group is currently the user's primary group.
A member could not be added to or removed from the local group because the member does not exist. A new member could not be added to a local group because the member has the wrong account type. The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because the service has accepted the maximum number of connections.
The Windows Installer service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. The installation source for this product is not available. Verify that the source exists and that you can access it. This installation package cannot be installed by the Windows Installer service.
You must install a Windows service pack that contains a newer version of the Windows Installer service. Another installation is already in progress. Complete that installation before proceeding with this install. This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. Contact the application vendor to verify that this is a valid Windows Installer package.
There was an error starting the Windows Installer service user interface. Contact your support personnel. Error opening installation log file. Verify that the specified log file location exists and that you can write to it. The Temp folder is on a drive that is full or is inaccessible. Free up space on the drive or verify that you have write permission on the Temp folder.
This installation package is not supported by this processor type. Contact your product vendor. This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.
Contact the application vendor to verify that this is a valid Windows Installer update package. This update package cannot be processed by the Windows Installer service.
Another version of this product is already installed. Installation of this version cannot continue. Invalid command-line argument. Only administrators have permission to add, remove, or configure server software during a Terminal Services remote session. If you want to install or configure software on the server, contact your network administrator.
The requested operation completed successfully. The system will be restarted so the changes can take effect. The upgrade cannot be installed by the Windows Installer service because the program to be upgraded might be missing, or the upgrade might update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade. Windows Installer does not permit updating of managed advertised products. At least one feature of the product must be installed before applying the update.
The Windows Installer service is not accessible in Safe Mode. Try again when your computer is not in Safe Mode or you can use System Restore to return your machine to a previous good state. The string UUID is invalid. The security database on the server does not have a computer account for this workstation trust relationship. The account used is an interdomain trust account. Use your global user account or local user account to access this server.
The account used is a computer account. The account used is a server trust account. The name or SID of the domain specified is inconsistent with the trust information for that domain.
The printer driver is not compatible with a policy enabled on your computer that blocks Windows NT 4. Logon failure: The machine you are logging on to is protected by an authentication firewall. The specified account is not allowed to authenticate to the machine. The network connection was made successfully, but the user had to be prompted for a password other than the one originally specified. The Workstation service is in an inconsistent state. Restart the computer before restarting the Workstation service.
The password does not meet the password policy requirements.
0コメント